| | |
 | End Frames 1506 x 713mm - Powdercoated BlueF125
Tough galvanised end frame for use with box section beams. Slotted at 25mm increments to allow multi-positioning of beams (supplied in pairs as part of a standard racking system). Single frames can be supplied (with additional beams) to allow the extension of racking. A middle frame is shared.
Price: £49.00 (Excluding: VAT at 20%) |
|
|
 | Boltless Rack - 2/2 Firkins or 2/2 KilsF184
High quality, bolt free assembly racking for use with the Filton Autotilt Stillage or Fixed Stillage (supplied separately). Extremely versatile, this rack lets you slot the beams into place at your preferred operating heights. Takes minutes to install.
The rack will accomodate either 4 firkins or 4 kils in a two over two configuration.
Overall dimensions (mm): W1381 x D713 x H1506.
Comprised of two slotted end frames and four powder coat finish box-section beams. Supplied with locking pins to secure the beams and four end caps for the end frames. To install, simply slot the beams onto the end frames at your selected height and secure with locking pins. Secure the rack to the floor with a fixing bolt in each corner. Finally, simply load your Autotilts onto the beams.
Price: £210.00 (Excluding: VAT at 20%) |
|
|
 | Boltless Rack - 3/3 Firkins or 2/2 KilsF185
High quality, bolt free assembly racking for use with the Filton Autotilt Stillage or Fixed Stillage (supplied separately). Extremely versatile, this rack lets you slot the beams into place at your preferred operating heights. Takes minutes to install.
The rack will accomodate either 6 firkins in a three over three configuration or 4 kils in a two over two configuration
Overall dimensions (mm): W1581 x D713 x H1506. Comprised of two slotted end frames and four powder coat finish box-section beams.
Supplied with locking pins to secure the beams and four end caps for the end frames. To install, simply slot the beams onto the end frames at your selected height and secure with locking pins. Secure the rack to the floor with a fixing bolt in each corner. Finally, simply load your Autotilts onto the beams.
Price: £225.00 (Excluding: VAT at 20%) |
|
|
 | Boltless Rack - 4/4 Firkins or 3/3 KilsF186
High quality, bolt free assembly racking for use with the Filton Autotilt Stillage or Fixed Stillage (supplied separately). Extremely versatile, this rack lets you slot the beams into place at your preffered operating heights. Takes minutes to install.
The rack will accomodate 8 firkins in a four over four configuration or 6 kils in a three over three configuration.
Overall dimensions (mm): W2061 x D713 x H1506.
Comprises of two slotted end frames and four powder coat finish box-section beams. Supplied with locking pins to secure the beams and four end caps for the end frames. To install, simply slot the beams onto the end frames at your selected height and secure with locking pins. Secure the rack to the floor with a fixing bolt in each corner. Finally, simply load your Autotilts onto the beams.
Price: £242.00 (Excluding: VAT at 20%) |
|
|
 | Boltless Rack 5/5 Firkins or 4/4 KilsF187
High quality, bolt free assembly racking for use with the Filton Autotil Stillage or Fixed Stillage (supplied separately). Extremely versatile, this rack lets you slot the beams into place at your preffered operating heights. Takes minutes to install. The rack will accomodate either 10 firkins in a five over five configuration or 8 kils in a four over four configuration.
Overall dimensions (mm): W2456x D713 x H1506. Comprises of two slotted end frames and four powder coat finish box-section beams.
Supplied with locking pins to secure the beams and four end caps for the end frames.
To install, simply slot the beams onto the end frames at your selected height and secure with locking pins. Secure the rack to the floor with a fixing bolt in each corner. Finally, simply load your Autotilts onto the beams.
Price: £245.00 (Excluding: VAT at 20%) |
|
|
 | Boltless Rack - 6/6 Firkins Or 5/5 KilsF188
High quality, bolt free assembly racking for use with the Filton Autotilt Stillage or Fixed Stillage (supplied separately). Extremely versatile, this rack lets you slot the beams into place at your preffered operating heights. Takes minutes to install.
The rack will accomodate up to ten firkins or eight kils (or a combination of both).Overall dimensions (mm): W2931 x H713 x D1506
Comprises of two slotted end frames and four powder coat finish box-section beams.
Supplied with locking pins to secure the beams and four end caps for the end frames. To install, simply slot the beams onto the end frames at your selected height and secure with locking pins. Secure the rack to the floor with a fixing bolt in each corner. Finally, simply load your Autotilts onto the beams.
Price: £275.00 (Excluding: VAT at 20%) |
|
